Brake Master Cylinder - ACDelco (174-1292)
2020-2021 ACDelco - 1741292
- Sale Price: $126.77
Details
- Brand:
- SKU:
174-1292
- GTIN: 00193468086836
- UPC: 193468086836
- Other Names:
84668150
- Description: ACDelco GM Original Equipment Brake Master Cylinder is a hydraulic pump mounted to the brake booster and contains a reservoir that holds brake fluid. This original equipment brake master cylinder has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Condition: New
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Additional Information
| Brand | GM Genuine Parts |
| Bleeder Hoses Included | No |
| Brake Booster Included | No |
| Brake Pressure Switch(s) Included | No |
| Dust Boot Included | No |
| Features & Benefits - Bullet 1 | Pressure tested to ensure safe and confident braking |
| Features & Benefits - Bullet 2 | Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality |
| Features & Benefits - Bullet 3 | GM-recommended replacement part for your GM vehicle's original factory component |
| Features & Benefits - Bullet 4 | Offering the quality, reliability, and durability of GM OE |
| Features & Benefits - Bullet 5 | Manufactured with GM Original Equipment specification for fit, form, and function |
| Gasket Or Seal Included | Yes |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems. |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Height (in) | 7.25 |
| Length (in) | 11.25 |
| Master Cylinder Bore Diameter | 1.48 |
| Master Cylinder Cap Included | Yes |
| Mounting Bracket Included | No |
| Mounting Hardware Included | No |
| Mounting Hole Quantity | 2 |
| PADB ID 7322 | 0.49 |
| PADB ID 7451 | 0.49 |
| Pedal Rod ID | No |
| Piston Quantity | 1 |
| Port Quantity | 2 |
| Programming Required | No |
| Push Rod Included | No |
| Reservoir Included | Yes |
| Reservoir Material | Plastic |
| Reservoir Style | Removable |
| Reservoir Type | Single |
| Sensor Included | Yes |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Brake warning light is on. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Fluid spots beneath the car, indicating there may be a leak within the cylinder. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Difficulty stopping the vehicle. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | A low or sinking brake pedal. |
| Signs of Wear & Troubleshooting - Section 1 - Header | Brake cylinder signs of wear include: |
| Weight (lb) | 3.54 |
| Width (in) | 10.5 |
Vehicle Fitment
Interchange
Policies
FindVintageParts.com
Welcome to FindVintageParts.com — your trusted source for hard-to-find Genuine OEM automotive parts. With over 30 years of experience in the automotive industry, we have built a reputation as the go-to destination for Genuine OEM parts from leading manufacturers, including Ford, BMW, General Motors, Honda, Mazda, Mercedes-Benz, Mopar, and Toyota.
Every part we sell is brand new and delivered in the manufacturer’s original packaging — the very same components installed at the factory. To ensure complete confidence in your purchase, we offer a free compatibility guarantee with the submission of your VIN, helping you get the right part the first time.
Our team of experienced parts professionals are always ready to assist by phone, text, or email. Whether you have questions about fitment, availability, or product details, we are here to provide expert guidance every step of the way.
For answers to common questions regarding returns, shipping, order tracking, or compatibility, please visit our FAQ page.
At FindVintageParts.com, we take pride in delivering Genuine OEM parts with unmatched service and support, helping you keep your vehicle running just as the manufacturer intended.