No image available
Front Driver Side Hydraulic Brake Hose - ACDelco (18J1892)
1993-2005 ACDelco - 18j1892
No image available
Details
- Brand:
- SKU:
18J1892
- GTIN: 00036666377057
- UPC: 036666377057
- Positions: Front Left
- Other Names:
19111275
- Description: ACDelco Brake Hydraulic Hoses are quality reinforced hoses that carry fluid to transmit force within the hydraulic brake system. Each brake hose contains double-crimped fittings to provide longer service life and durability. The ACDelco Professional Brake Hydraulic Hose is a high quality replacement component for your vehicle's braking system. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Condition: New
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Additional Information
| Brand | ACDelco Professional |
| Axis 1 Length | 18.75 476.25 |
| Bracket Included | Yes |
| Bracket Material | Corrosion Resistant Steel |
| End 1 Fitting Material | Corrosion Resistant Steel |
| End 1 Fitting Type | M10-1 |
| End 1 Thread Diameter (in) | 0.393 |
| End 1 Thread Diameter (mm) | 10 |
| End 2 Fitting Material | Corrosion Resistant Steel |
| End 2 Fitting Type | NPT |
| FAQ - Answer 1 | Yes, ACDelco Professional Brake Kits and Hardware come with a 12 month/ unlimited mile warranty. |
| FAQ - Answer 2 | Yes, it is a good idea to inspect your brake fluid often. |
| FAQ - Answer 3 | Yes, both part offerings are high quality replacement parts. |
| FAQ - Question 1 | Are these brake parts durable? |
| FAQ - Question 2 | Do I need to check my brake fluid when replacing other brake parts? |
| FAQ - Question 3 | Can I use ACDelco GM Original Equipment parts with my ACDelco Professional brake parts? |
| Features & Benefits - Bullet 1 | Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation |
| Features & Benefits - Bullet 2 | Premium brass fittings provide an excellent hydraulic seal |
| Features & Benefits - Bullet 3 | Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety |
| Gasket Or Seal Included | Yes |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems: |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Height (in) | 3.03 |
| Jacket Material | EPDM Rubber |
| Length (in) | 7.12 |
| Mounting Hardware Included | Yes |
| Programming Required | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Visible ridges on rotor surface. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Chirping, grinding, or squeaking noises when braking. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Difficulty stopping the vehicle. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | A low or sinking brake pedal. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Brake pedal pulsation (not to be confused with normal ABS operation). |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 6 | Vehicle pulls to the left or right when brakes are applied. |
| Signs of Wear & Troubleshooting - Section 1 - Header | Brake rotor signs of wear include: |
| Teflon Lined | No |
| Weight (lb) | 0.41 |
| Width (in) | 4.53 |
Vehicle Fitment
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|
Interchange
Policies
FindVintageParts.com
Welcome to FindVintageParts.com — your trusted source for hard-to-find Genuine OEM automotive parts. With over 30 years of experience in the automotive industry, we have built a reputation as the go-to destination for Genuine OEM parts from leading manufacturers, including Ford, BMW, General Motors, Honda, Mazda, Mercedes-Benz, Mopar, and Toyota.
Every part we sell is brand new and delivered in the manufacturer’s original packaging — the very same components installed at the factory. To ensure complete confidence in your purchase, we offer a free compatibility guarantee with the submission of your VIN, helping you get the right part the first time.
Our team of experienced parts professionals are always ready to assist by phone, text, or email. Whether you have questions about fitment, availability, or product details, we are here to provide expert guidance every step of the way.
For answers to common questions regarding returns, shipping, order tracking, or compatibility, please visit our FAQ page.
At FindVintageParts.com, we take pride in delivering Genuine OEM parts with unmatched service and support, helping you keep your vehicle running just as the manufacturer intended.