Front Driver Side Suspension Strut - ACDelco (506-952)
2013-2015 Chevrolet Camaro - 506952
- Sale Price: $218.03
Details
- Brand:
- SKU:
506-952
- GTIN: 00707773975664
- UPC: 707773975664
- Positions: Front Left
- Other Names:
22922602
- Description: ACDelco GM Original Equipment Suspension Struts are GM-recommended replacements for your vehicle's original components. Suspension struts are similar to standard shock absorbers, but have the added function of maintaining part of the suspension design. They are an integral part of a vehicle's suspension system, providing structural support for the vehicle. These original equipment suspension struts have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
suspension-strut-assembly;strut-assmebly;suspension-strut; - Condition: New
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Additional Information
| Brand | GM Genuine Parts |
| Adjustable | No |
| Adjustable Damping | No |
| Adjustable Rebound | No |
| Bladder(s) Included | No |
| Body Diameter | 2.17 55 |
| Body Length | 12.94 328.55 |
| Body Type | McPherson |
| Boot Included | No |
| Coil Spring Included | No |
| Coil Spring Insulator(s) Included | No |
| Compressed Length | 12.94 328.55 |
| Extended Length | 16.04 407.4 |
| FAQ - Answer 1 | Yes. Although shocks and struts perform a similar function, they vary greatly in their design. The major difference between shocks and struts is that a strut is a structural part of the vehicles suspension system where a shock is not. A strut is also a crucial part of the vehicles steering system and greatly affects alignment angles. |
| FAQ - Answer 2 | Yes. You should have your vehicle aligned if you are replacing your vehicle's struts. However, it is not necessary to get your vehicle aligned when replacing your vehicle's shocks unless there was a previous issue. |
| FAQ - Answer 3 | Yes. It is important to choose the correct shock or strut for your vehicle model and year, as well as for the location in the vehicle. |
| FAQ - Question 1 | Is there a difference between a shock and a strut? |
| FAQ - Question 2 | Should I have my vehicle aligned after replacing my shocks or struts? |
| FAQ - Question 3 | Do I need different shocks for front, rear, left, or right applications? |
| Features & Benefits - Bullet 1 | GM-recommended replacement part for your GM vehicle's original factory component |
| Features & Benefits - Bullet 2 | Offering the quality, reliability, and durability of GM OE |
| Features & Benefits - Bullet 3 | Manufactured to GM OE specification for fit, form, and function |
| Good Maintenance Practices - Section 1 - Bullet 1 | Ball joints and other suspension components |
| Good Maintenance Practices - Section 1 - Bullet 2 | Brakes |
| Good Maintenance Practices - Section 1 - Bullet 3 | Tires |
| Good Maintenance Practices - Section 1 - Header | Your vehicle's struts slowly deteriorate over time, though this wear is normally difficult to detect. Worn struts can also cause additional wear to other vehicle components, so to maximize your vehicle's ride comfort, it is recommended to inspect your vehicle's struts every year. Be sure to always refer to your Vehicle Owner's manual for additional vehicle maintenance practices. Potential affected components may include: |
| Good Maintenance Practices - Section 2 - Bullet 1 | Leaking oil or wetness along the body of the shock or strut |
| Good Maintenance Practices - Section 2 - Bullet 2 | Broken mounts |
| Good Maintenance Practices - Section 2 - Bullet 3 | Broken, damaged, or missing mounting hardware |
| Good Maintenance Practices - Section 2 - Bullet 4 | Dented reservoir tube |
| Good Maintenance Practices - Section 2 - Bullet 5 | Bent or scratched piston rod |
| Good Maintenance Practices - Section 2 - Bullet 6 | Cupped tire wear |
| Good Maintenance Practices - Section 2 - Bullet 7 | Damaged spring seat, spring, and spring isolator |
| Good Maintenance Practices - Section 2 - Bullet 8 | Damaged strut bearing |
| Good Maintenance Practices - Section 2 - Header | To inspect your struts to gauge wear, check for: |
| Grade Type | Performance |
| Height (in) | 8 |
| Housing Material | Steel |
| Length (in) | 23.75 |
| Mounting Hardware Included | No |
| Programming Required | No |
| Rod Diameter | 21.95 0.86 |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Vehicle has 'acceleration squat' |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Vehicle does not sit level |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Vehicle steering pulls |
| Signs of Wear & Troubleshooting - Section 2 - Bullet 1 | Your ride is harsh, bumpy or shaky |
| Signs of Wear & Troubleshooting - Section 2 - Bullet 2 | Your vehicle bounces excessively |
| Signs of Wear & Troubleshooting - Section 2 - Bullet 3 | Your vehicle leans or sways while turning |
| Signs of Wear & Troubleshooting - Section 2 - Bullet 4 | Your vehicle bottoms out |
| Signs of Wear & Troubleshooting - Section 2 - Header | It could be time to replace your struts if, when driving on a surface with bumps and/or dips: |
| Signs of Wear & Troubleshooting - Section 3 - Bullet 1 | You notice fluid leakage from your vehicle's struts |
| Signs of Wear & Troubleshooting - Section 3 - Bullet 2 | Your vehicle's struts have dented or heavily scratched housings or mounts |
| Signs of Wear & Troubleshooting - Section 3 - Header | Uneven patches of wear on the edges of your tire can be a sign of weak ride control (shocks or struts). This wear, called cupping, appears as scalloped dips around the surface of the tread. Other signs it could be time to replace your shocks or struts include but are not limited to: |
| Strut Body Color | Black |
| Strut Mount Insulator(s) Included | No |
| Weight (lb) | 12.54 |
| Width (in) | 8.62 |
Vehicle Fitment
Select Your Vehicle
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|
Interchange
Policies
FindVintageParts.com
Welcome to FindVintageParts.com — your trusted source for hard-to-find Genuine OEM automotive parts. With over 30 years of experience in the automotive industry, we have built a reputation as the go-to destination for Genuine OEM parts from leading manufacturers, including Ford, BMW, General Motors, Honda, Mazda, Mercedes-Benz, Mopar, and Toyota.
Every part we sell is brand new and delivered in the manufacturer’s original packaging — the very same components installed at the factory. To ensure complete confidence in your purchase, we offer a free compatibility guarantee with the submission of your VIN, helping you get the right part the first time.
Our team of experienced parts professionals are always ready to assist by phone, text, or email. Whether you have questions about fitment, availability, or product details, we are here to provide expert guidance every step of the way.
For answers to common questions regarding returns, shipping, order tracking, or compatibility, please visit our FAQ page.
At FindVintageParts.com, we take pride in delivering Genuine OEM parts with unmatched service and support, helping you keep your vehicle running just as the manufacturer intended.