Gasoline Fuel System Treatment Plus - 12 oz - ACDelco (10-3012)
- 103012
- Sale Price: $19.87
Details
- Brand:
- SKU:
10-3012
- GTIN: 00808709482369
- UPC: 808709482369
- Other Names:
88865595
- Description: ACDelco Fuel System Treatment Plus cleans the entire fuel system and restores lost power and performance caused by carbon deposit build-up. It can be used in passenger cars and light duty trucks with gasoline engines. This fuel system cleaner helps clean sulfur corrosion and provides a real defense against harmful sulfur contamination in the fuel. Regular use of this treatment can also prevent fuel gauge malfunction caused by the sulfur components that are found in some gasolines. ACDelco Fuel System Treatment Plus provides protection that has been shown to last for thousands of miles. One ounce of this product will treat one gallon of fuel. ⚠
WARNING: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer, and Toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go tohttps://www.P65Warnings.ca.gov - Condition: New
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Additional Information
| Brand | ACDelco GM Original Equipment |
| Application Method | Pour |
| Catalytic Converter Safe | Yes |
| FAQ - Answer 1 | No, the fuel system should be cleaned whenever the engine appears to be running poorly such as difficult starts, rough idle or poor acceleration. |
| FAQ - Answer 2 | Yes, low octane or cetane fuel can cause engine knock which can damage the engine. Fuel with a minimum amount of detergents and additives can also lead to harmful injector and engine deposits causing difficult starts, poor acceleration and reduced gas mileage. |
| FAQ - Answer 3 | Yes, fuel system cleaning can reduce or eliminate many causes of fuel system problems. If problems persist after a second system cleaning the problem is more serious and further investigation will be required. |
| FAQ - Answer 4 | No, but if ACDelco Fuel System Treatment Plus does not correct the problem after two treatments other types of cleaning or tuning will be required. |
| FAQ - Answer 5 | Yes, difficulty starting, rough idling, poor acceleration and poor gas mileage are all signs the fuel system may need cleaning. |
| FAQ - Answer 6 | No, each of these cleaners can be used independently or in combination with each other to maximize system cleaning. Under most circumstances these products do not require any other product prior to or with any other product. If symptoms continue further diagnostics or repairs may be needed. |
| FAQ - Question 1 | Should I clean my fuel system regularly? |
| FAQ - Question 2 | Can using a low octane/cetane fuel cause significant problems with my fuel system components? |
| FAQ - Question 3 | Is do-it-yourself fuel system cleaning enough to keep my vehicle running smoothly? |
| FAQ - Question 4 | Should I take my vehicle to a technician regularly for a professional fuel system cleaning? |
| FAQ - Question 5 | Are there symptoms I can look for that show my vehicle might need a fuel system cleaning? |
| FAQ - Question 6 | Are there other products that are necessary to use before/after/along with these fuel system cleaners? |
| Features & Benefits - Bullet 1 | Removes deposits from port fuel injectors to keep injectors functioning properly, ensuring unrestricted fuel flow |
| Features & Benefits - Bullet 2 | Cleans intake valve deposits to help eliminate starting issues and ensure maximum drivability |
| Features & Benefits - Bullet 3 | Cleans combustion chambers to assist in eliminating engine knocking, pinging, and run-on in older vehicles, and loss of power and acceleration in knock-sensor equipped vehicles |
| Features & Benefits - Bullet 4 | Coats all metallic surfaces, protecting the entire fuel system |
| Good Maintenance Practices - Section 1 - Bullet 1 | 1 oz. of this product treats 1 gallon of fuel. Add the number of ounces of fluid equal to the capacity in gallons for the fuel tank and then fill the tank. More than one bottle may be necessary to properly treat some vehicles. Minor over-treatment (up to 10%) will have no adverse effects on the engine. Repeat every time the oil is changed. |
| Good Maintenance Practices - Section 1 - Bullet 2 | The goal of proper fuel system maintenance is to keep the system clean and help ensure the most economical and efficient fuel system life. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Some of the ways contaminants can be kept out of the system from the onset are by keeping fuel system components, especially fuel transfer equipment like nozzles, tanks, and hoses, free from surface dirt and out of the rain. |
| Oxygen Sensor Safe | Yes |
| Programming Required | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Fuel system service is possibly required when the vehicle is hesitating, having trouble starting, achieving sub-par gas mileage, operating sluggishly, and/or providing poor overall performance. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Faulty fuel injectors in particular can cause a number of issues, including abrupt engine power, engine misfire, rough idling, fuel leakage, and reduced fuel economy. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Fuel injectors (particularly the injector nozzles) are in an environment where tremendous heat is generated. The burning of fuel can leave hardened carbon deposits on piston valves and fuel injector nozzle heads that interfere with the spray pattern and flow of fuel. The preceding issues, especially when multiple issues are encountered at the same time, are indications that this and other forms of contamination have occurred. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Although significant repair of fuel system components may be required in serious cases, fuel system additives are often an excellent solution for nagging problems. |
Vehicle Fitment
Select Your Vehicle
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|
Interchange
Policies
FindVintageParts.com
Welcome to FindVintageParts.com — your trusted source for hard-to-find Genuine OEM automotive parts. With over 30 years of experience in the automotive industry, we have built a reputation as the go-to destination for Genuine OEM parts from leading manufacturers, including Ford, BMW, General Motors, Honda, Mazda, Mercedes-Benz, Mopar, and Toyota.
Every part we sell is brand new and delivered in the manufacturer’s original packaging — the very same components installed at the factory. To ensure complete confidence in your purchase, we offer a free compatibility guarantee with the submission of your VIN, helping you get the right part the first time.
Our team of experienced parts professionals are always ready to assist by phone, text, or email. Whether you have questions about fitment, availability, or product details, we are here to provide expert guidance every step of the way.
For answers to common questions regarding returns, shipping, order tracking, or compatibility, please visit our FAQ page.
At FindVintageParts.com, we take pride in delivering Genuine OEM parts with unmatched service and support, helping you keep your vehicle running just as the manufacturer intended.