No image available
Premium Lawn and Garden V-Belt - ACDelco (3L280P)
- 3l280p
No image available
- Sale Price: $8.12
Details
- Brand:
- SKU:
3L280P
- GTIN: 00021625259536
- UPC: 021625259536
- Other Names:
88934055
- Description: ACDelco Specialty Premium Lawn and Garden V-Belts are green belts that are an alternative to conventional light duty belts. Their high performance construction delivers more horsepower, less stretch, and longer service life. ACDelco Specialty Premium Lawn and Garden V-Belts are suitable for outdoor power equipment, appliances, and industrial applications where Fractional Horsepower (FHP) Belts are typically used. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
accesory-drive-belt;belt;drive-belt; - Condition: New
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Additional Information
| Brand | ACDelco Specialty |
| Cord Material | Aramid |
| Cross Section Designation | 6728 |
| Effective Length | 27.90 709.0 |
| FAQ - Answer 1 | Yes, this may be indicative of an alignment issue. |
| FAQ - Answer 2 | Yes, you may lose power or stall out. |
| FAQ - Answer 3 | Yes, ensure that proper tension is applied and pulleys are aligned during installation. Leading causes of belt failure are improper tension and misaligned pulleys. Both these conditions cause excessive heat which leads to belt failure. |
| FAQ - Answer 4 | No, when the belt backing has been torn or cracked, the belt should be replaced. |
| FAQ - Answer 5 | No, use the belt in the way it's listed in the ACDelco belts and hoses catalog. |
| FAQ - Question 1 | Could a non-automotive belt tear during use? |
| FAQ - Question 2 | Will I know immediately if a non-automotive belt tears? |
| FAQ - Question 3 | Are there steps I can take to ensure a longer non-automotive belt life? |
| FAQ - Question 4 | Is there a way to repair a torn non-automotive belt? |
| FAQ - Question 5 | Can I use the same non-automotive belt for multiple uses? |
| Features & Benefits - Bullet 1 | Has bareback construction for smooth clutching on shock loaded, backside-idler driven equipment |
| Features & Benefits - Bullet 2 | Has aramid tensile cords that combine limited stretch with extraordinary strength and durability |
| Features & Benefits - Bullet 3 | Meets RMA oil and heat resistant standards for increased belt life |
| Good Maintenance Practices - Section 1 - Bullet 1 | Do not use belt dressings to stop belt slippage or noise. These are oil based and may cause belt deterioration. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Never twist a belt more than 90 degrees during inspection. This may damage the tensile cords and cause premature failure. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Replace V-belts after 3 to 4 years, or every 36,000 to 48,000 miles. |
| Good Maintenance Practices - Section 1 - Bullet 4 | Use an approved tension gauge to check belt tension. |
| Good Maintenance Practices - Section 1 - Bullet 5 | Check for proper belt tension after 500 to 1,000 miles following belt installation. Recheck often, at least twice a year or every 6,000 miles. |
| Grade Type | Regular |
| Outside Circumference | 28.00 711.0 |
| Programming Required | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Rubber Loss: (most common belt wear) a belt wear gauge measures rubber loss, which can result in reduced power transfer from the crank to the accessories. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Glazing: shiny spots can indicate a slipping belt that isn't properly transferring power to accessories. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Pilling: worn rubber can fill in grooves and cause noise, heat, vibration, and excessive wear. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Abrasion: wear along the side could indicate misalignment due to a failed tensioner. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Cracking: older neoprene belts crack as they near the end of their life cycle and often need to be replaced. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 6 | Engine stops or backfires. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 7 | The belt is producing a squealing noise. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 8 | Headlights dim while driving. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 9 | Loss of battery charge. |
| Top Width | 0.380 10.00 |
Vehicle Fitment
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|
Interchange
Policies
FindVintageParts.com
Welcome to FindVintageParts.com — your trusted source for hard-to-find Genuine OEM automotive parts. With over 30 years of experience in the automotive industry, we have built a reputation as the go-to destination for Genuine OEM parts from leading manufacturers, including Ford, BMW, General Motors, Honda, Mazda, Mercedes-Benz, Mopar, and Toyota.
Every part we sell is brand new and delivered in the manufacturer’s original packaging — the very same components installed at the factory. To ensure complete confidence in your purchase, we offer a free compatibility guarantee with the submission of your VIN, helping you get the right part the first time.
Our team of experienced parts professionals are always ready to assist by phone, text, or email. Whether you have questions about fitment, availability, or product details, we are here to provide expert guidance every step of the way.
For answers to common questions regarding returns, shipping, order tracking, or compatibility, please visit our FAQ page.
At FindVintageParts.com, we take pride in delivering Genuine OEM parts with unmatched service and support, helping you keep your vehicle running just as the manufacturer intended.