Rear Brake Rotor - ACDelco (84951567)
2015-2019 Chevrolet Corvette - 84951567
- Sale Price: $840.98
Details
- Brand:
- SKU:
84951567
- GTIN: 00193468734331
- UPC: 193468734331
- Positions: Rear
- Other Names:
84951567
- Description: ACDelco GM Original Equipment Disc Brake Rotors are metal discs mounted to the wheel hub where the caliper can press the brake pads against the disc surfaces to slow the vehicle, and are GM-recommended replacements for your vehicle's original components. These disc brake rotors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
disc-brake-rotor;rotor;brake-rotor;disc-brake; - Condition: New
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Additional Information
| Brand | ACDelco GM Original Equipment |
| ABS Tone Ring Included | No |
| Bearings Included | No |
| Bolt Hole Diameter (in) | 0.53 |
| Bolt Hole Diameter (mm) | 13.5 |
| Bolt Hole Quantity | 5 |
| Construction | Full Cast |
| Directional or Non-Directional Brake Surface | Directional |
| Disc Finish | Ground |
| Discard Thickness | 0.94 24 |
| Features & Benefits - Bullet 1 | Inspected for balance, resulting in smooth brake operation and noise reduction |
| Features & Benefits - Bullet 2 | GM-recommended replacement part for your GM vehicle's original factory component |
| Features & Benefits - Bullet 3 | Offering the quality, reliability, and durability of GM OE |
| Features & Benefits - Bullet 4 | Manufactured to GM OE specification for fit, form, and function |
| Good Maintenance Practices - Section 1 - Bullet 5 | The following inspections and maintenance procedures can help prevent potential brake problems. |
| Good Maintenance Practices - Section 1 - Bullet 6 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 7 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 8 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Bullet 9 | Check the thickness of your brake pads. |
| Good Maintenance Practices - Section 2 - Bullet 5 | The following should be conducted by a qualified technician: |
| Good Maintenance Practices - Section 2 - Bullet 6 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 7 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 8 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 9 | Parking brake adjustments (as needed). |
| Grade Type | Performance |
| Height (in) | 1.93 |
| Height (mm) | 49 |
| Inside Diameter | 7.91 201 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 120.65 4.75 |
| Nominal Thickness | 1.02 26 |
| Outside Diameter | 14.37 365 |
| Overall Height | 1.85 47 |
| Rust Resistant Coating | Yes |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 10 | Visible ridges or deep grooves on the rotor surface. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 9 | Vehicle pulls to the left or right when brakes are applied. |
| Solid Or Vented Type Rotor | Vented |
| Stud/Lug Hole Circle Diameter | 120.65 4.75 |
| Stud/Lug Hole Diameter | 13.5 0.53 |
| Stud/Lug Hole Quantity | 5 |
| Surface Type | Slotted |
Vehicle Fitment
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|
Interchange
Policies
FindVintageParts.com
Welcome to FindVintageParts.com — your trusted source for hard-to-find Genuine OEM automotive parts. With over 30 years of experience in the automotive industry, we have built a reputation as the go-to destination for Genuine OEM parts from leading manufacturers, including Ford, BMW, General Motors, Honda, Mazda, Mercedes-Benz, Mopar, and Toyota.
Every part we sell is brand new and delivered in the manufacturer’s original packaging — the very same components installed at the factory. To ensure complete confidence in your purchase, we offer a free compatibility guarantee with the submission of your VIN, helping you get the right part the first time.
Our team of experienced parts professionals are always ready to assist by phone, text, or email. Whether you have questions about fitment, availability, or product details, we are here to provide expert guidance every step of the way.
For answers to common questions regarding returns, shipping, order tracking, or compatibility, please visit our FAQ page.
At FindVintageParts.com, we take pride in delivering Genuine OEM parts with unmatched service and support, helping you keep your vehicle running just as the manufacturer intended.